End-of-Year Close. Please note that we will be closed from the 14th - 28th Dec. Apologies for any inconvenience, our team is taking a well deserved break!
View Favourites
The DD130 locator utilises power, and radio modes. This means the locator can be used without the transmitter to find power lines under load and potential metallic lines. When used with a transmitter additional metallic lines can be located, and depth measurements can be taken. The DD130 also includes the additional features of current measurements, and lower frequency which aid in long distance tracing and identification of sewer cameras.
Operating Frequencies
Mode - Frequency
Power - 50 Hz or 60 Hz mains electrical and harmonics
Radio - 15 kHz to 60 kHz
Auto - Power, Radio, 33 kHz
Transmitter - 32.768 (33) kHz, 8.192 (8) kHz, 512 Hz (DD130 series models), 640 Hz (DD130 series models)
Depth Estimation
Locator - DD130 series
Depth range - Line 0.3m to 3m, Sonde 0.1 to 9.99m
Depth accuracy (Undistorted signal) - 10%
General Technical Data
Mode: Output
Display panel: Monochrome
Audio: 85 dBA @ 30 cm
  • Power, Radio and Auto mode:
  • Continuous tone (different pitch for each mode)
  • 8 kHz and 33 kHz mode: All tones are different.
  • Pulsed tone (different pitch for each mode)
  • 512 Hz and 640 Hz mode:
  • Pulsed tone (different pitch for each mode).
  • All tones are different
Battery Type: 6 x LR6 (AA) alkaline
Typical operating time: 15 hours constant use at 20 °C/68 °F
Dimensions: 85 x 250 x 760 mm / 3.4" x 10" x 30"
Weight (incl. batteries): 2.7 kg with batteries
Temperature: Operating -20 °C to +50 °C, -4 °F to +122 °F / Storage -40 °C to +70 °C, -40 °F to +158 °F
Protection: Conforms to IP54
Humidity: 95% RH non condensing. The effects of condensation are to be effectively counteracted by periodically drying out the product.








 

 

 

 

 

Questions?

In order to assist us in reducing spam, please type the characters you see: